Categories

Contact Us

Shenzhen Cian Electronics Co.,Ltd

Address: B Building, Weixin Industrial Park, ShiTouShan Industrial Zone, ShiYan Town, Baoan District, Shenzhen City, China

Tel: +86-755-29953144

M/P: +8613008800940

E-mail: beter@magneticontacts.com

Magnistor Approach Reed

Magnistor Approach Reed

Magnistor Approach Reed Further Reading Introduction of Blower The blower is mainly composed of the following six parts: motor, air filter, blower body, air chamber, base (and fuel tank), and drip nozzle. The blower is operated eccentrically by the rotor biased in the cylinder, and the volume...

Product Details

Magnistor Approach Reed



Further Reading

Introduction of Blower

The blower is mainly composed of the following six parts: motor, air filter, blower body, air chamber, base (and fuel tank), and drip nozzle. The blower is operated eccentrically by the rotor biased in the cylinder, and the volume change between the blades in the rotor groove sucks, compresses, and discharges the air. In operation, the pressure difference of the blower is used to automatically send the lubrication to the drip nozzle, and drip into the cylinder to reduce friction and noise, and at the same time keep the gas in the cylinder from flowing back. This type of blower is also called a vane blower.



The blower operates without friction in the body and does not require lubrication, so that the discharged gas does not contain oil. It is an ideal pneumatic conveying source for chemical, food and other industries.
The blower is a volume operated blower. When used, the flow changes very little as the pressure changes. But the flow varies with the speed. Therefore, the choice of pressure is wide, and the choice of flow can be achieved by selecting the speed.
The speed of the blower is relatively high, and the gap between the rotor and the rotor, the rotor and the body is small, so that leakage is small and the volumetric efficiency is high.
The structure of the blower determines that its mechanical friction loss is very small. Because only the bearing and gear pair have mechanical contact on the material selection, the rotor, casing and gear ring have sufficient mechanical strength. Safe operation and long service life are a major feature of blower products.
The rotor of the blower is static and dynamic balanced. The finished product runs smoothly and the vibration is extremely small.
The blowers with the above characteristics mainly include: Roots blower, side flow fan, multi-stage centrifugal blower.

Hot Tags: magnistor approach reed, China, manufacturers, suppliers, factory, customized, bulk, discount, low price, in stock, free sample
Related Products

Inquiry